Blick auf eine Fooke Fräsmaschine

Compact Gantry Milling Machine
ENDURA® 7000LINEAR

Thermosymmetrical machine design. For high-performance heavy-duty cutting of high-strength materials.

Compact Gantry Milling Machine ENDURA® 7000LINEAR

The ENDURA® 7000LINEAR is an overhead tool milling machine, specially designed for the heavy-duty rough machining of solid and high-strength materials. It has a dimensionally stable and compact design. This not only means a large processing volume with a relatively small footprint, but also that the machine does not need to be placed on foundations.

This compact tool milling machine ENDURA® 7000LINEAR was specially developed for the tool and mould construction, for a highly productive roughing, semi-finishing and finishing application of the customary high-strength material

 

 

Due to its high-dynamic features, the machine is particularly suitable for the high-efficiency machining in the field of 2,5 D, for processing ruled geometries, cutting contours, pockets, surfaces, drill holes, threads and spindle operations. In the field of 3D, the ENDURA® 7000LINEAR offers highest dynamics in its class, both in 3-axes as in 5-axes machining, from roughing to high precision processing with best surface results and an excellent dimensional accuracy.

During the machine’s new development, our top priority was the well-known, FOOKE-typical aspect of “excellent quality of motion control, coupled with highest accuracy of the "Tool Center Point”

 

The use of linear motors in specially designed machine structural elements enables the machine to be optimally controlled, minimises contouring errors and offers the highest line speeds. This gives rise to excellent motion dynamics, especially with inconstant geometric pathways.

The robust and weight-optimised design coupled with the use of vibration-damping casting materials in suitable structural components means that the vibrational excitations caused by the milling process and the directional-change-induced movements are vastly reduced/dampened.

Features, technology and equipment:

  • Highly dynamic GANTRY-high bed tool milling machine in compact construction:
    Gantry moving in X-direction.
  • Design of the machine:
    Machine bed (X-axis), travel beam (Z-axis) and cross slide made in solid casting; side walls and gantry (Y-axis) as steel-welded construction.
  • No foundation required:
    Due to the inherently rigid machine bed, a standard industrial floor, approx. 300 mm thick, steel-reinforced, is sufficient for the installation; a special foundation, is not required. The machine is set up and aligned by fixators bolted to the hall floor.
  • Drive technology of linear axes:
    Water-cooled linear motors in the linear axes (X, Y and Z), X axis designed as a GANTRY axes pair.
  • Direct measuring systems:
    The linear and rotary axes are equipped with direct measuring systems.
  • Z-axis weight compensation:
    Highly dynamic pneumatic cylinders support the Z-axis drive.
  • Direct measuring systems:
    The linear and rotary axes are equipped with direct measuring systems.
  • Linear axes guides:
    The linear axes are equipped with hardened and ground, backlash-free pre-tensioned guide elements.

For high-performance heavy-duty machining of high-strength materials

Thermosymmetrical machine design

Kompakt-Portalfräsmaschine ENDURA® 7000

Advantages at a glance.

  • For high-performance heavy-duty machining of high-strength materials
  • Large machining area, small footprint, foundationless installation
  • Thermosymmetrical machine concept
  • High structural rigidity, highest dynamics and outstanding accuracies
  • Material range: steel, cast iron and aluminum
  • Direct drives in all axes (linear and torque motors)
  • Travels up to 236.2" x 177.2" x 59,1’’
  • Range of materials: steel, cast iron and aluminum

Compact Gantry Milling Machine
ENDURA® 7000LINEAR

For high-performance heavy-duty machining of high-strength materials.

Traverse paths

X-axis: 118.1" / 177.2" / 236.2"

Y-axis: 137.8" / 177.2"

Z-axis: 59,1’’

 

Continuously variable feed rates

X-axis: 0.197"/min - 2,559.1"/min

Y-axis: 0.197"/min - 2,559.1"/min

Z-axis: 0.197"/min - 2,559.1"/min

 

Acceleration up to 118.1"/sec²

 

Rapid traverse

X-axis: 213"/min

Y-axis: 213"/min

Z-axis: 213"/min

 

Position accuracy

X-axis: 0.0006"

Y-axis: 0.0006"

Z-axis: 0.0006"

 

Position scatter

X-axis: 0.0004"

Y-axis: 0.0004"

Z-axis: 0.0004"

Inherently rigid compact machine with closed machine bed

Wear-free, highly dynamic linear motors in all linear axes (X, Y and Z) and torque motors in the rotary axes (C and A)

Direct measuring systems in all axes (X, Y, Z, C and A)

Safety systems and brakes in all linear axes (X, Y and Z)

Drive units consistently protected by bellows

Automatic tool changing systems

Minimum quantity spray dosing system

Coolant systems (wet operation)

Tool measuring systems

Workpiece measuring systems

Chips and dust disposal systems

Emulsion mist extraction systems

Plane cover / Sound insulation enclosure

Online-Service

Download Product Brochure

Download Milling Head Overview